Service

Design


Professional Injection Mold Design in China


With our experienced injection mold engineers in the factory, Alpine-mold specializes in high-efficiency plastic injection mold design and manufacturing. Our injection molds are produced with great precision and high tolerances to match the geometrics of your part design. We also believe that a mold should give you long-term value.


Injection Mold Gate Design

The gating system of injection mold plays a vital role in mold production and product quality. Whether the gating system design is reasonable or not has a direct impact on the quality of the products, including appearance, warping deformation, weld lines, flow marks, trapped gas and so on.

 

Injection Mold Cooling System Design

A well designed cooling system can significantly shorten the molding cycle, increase production capacity and reduce costs. Improper design of the cooling system will lengthen molding time, increase costs; uneven cooling will cause product warpage deformation and other undesirable.

 

Injection Molding System Design

Unreasonable design of the molding system will affect the mold-making cycle and injection molding cycle, as well as product appearance and performance. Thus, our engineers pay 100% attention to the design of core and cavity, ensuring the best product possible.

 

Ejection System Design

The ejection system will determine the appearance and performance of the final product, unreasonable ejection system will cause deformation, whitening, rupture and so on. With 20 years of experience in mold design, Mogel-mold got you covered.


Injection Mold Design Drawing & Engineering Process


We have tailored our mold design processes in stages to ensure that every relevant department works in coordination with the other. The process unfolds as follows.


Mold Flow Analysis
Mold flow analysis is a consultative session. It involves the project manager reviewing the client’s brief using MoldFlow software alongside other experts like the injection mold designer and production engineers. During these sessions, the team would evaluate crucial design factors such as mold precision, draft angle, and cycle times. Every department gives its input and recommends modifications if necessary. We have incorporated this step because an uncoordinated design approach results in costly errors and delays.


DFM Injection Mold
Alpine Mold is committed to providing you with wholesome injection molding solutions. This is why we analyze your injection molding project in its entirety; from the part design to anticipated production processes. Our goal is to ensure that we not only deliver a suitable mold but that it is viable and optimized for your project. Our design experts may offer advice on part design, material choice, or whether the part is properly designed for manufacturability.


Mold Design
All our injection mold design engineering is done using Computer-Aided Design(CAD) software. It has inbuilt tools that guide the plastic mold designer as they draw to ensure that we make molds with high precision. Further, it makes it easy to review mold designs in great detail at different angles before the mold is prototyped for more analysis. This saves time as most design flaws can be detected and addressed early on.


Design Injection Mold in Only 3 Steps


Send us your mold sketch or sample
Before we could start making your mold prototype,we will need a comprehensive sketch.of your mold. We will use it as the core design for your plastic mold design. Confirm the injection molded part specifications
Once we have your design specifications, we will need you to confirm them. We will consider it a green light to create your mold prototype. Confirm DFM analysis report
We will conduct a DFM analysis report to ensure that the product is optimized for your project. We will need you to confirm the analysis before we go through with the production process.
The professional Injection Mold Design Service can provide to you ,please Contact us to learn more today.